 |
| image credit: SVSSOUND |
best SVS subwoofer for the money
SVS was founded in 1998 by a group of audio enthusiasts seeking to develop a better alternative to the underperforming and overpriced subwoofers flooding the US retail market. They have exceeded all expectations, and SVS is now a global brand with great credibility and a whole army of loyal fans of the brand. Using state-of-the-art technology, and high-quality components, the SVS team has created a line of premium audio products that bring music and movies to life with stunning realism - all at affordable prices.
BEST SVS SUBWOOFER FOR MONEY
image Credit: SVSSOUND
SVS SB 1000 PRO SUBWOOFER
The SVS SB-1000 Pro subwoofer is based on the powerful Sledge STA-325D amplifier, the output stages of which are made on MOSFETs capable of providing high output current. The amplifier delivers 325 watts of continuous power peaking up to 820 watts with low distortion. Signal processing uses a 50MHz DSP from Analog Devices with 56-bit filtering. Its processing power guarantees impeccable sound quality adapted to the acoustic characteristics of the room.
The drivers in the SVS 1000 Pro subwoofers were developed almost from scratch for the series. The design of the drivers uses a double ferrite magnet and a parabolic suspension of a long-throw aluminum cone, ensuring the achievement of high sound pressure in the listening room. with a long range for extreme walks with increased indoor pressure.
When the enclosed subwoofer is equipped with a powerful amplifier and a quality driver, you can expect deep and clear bass. But only if such a system is properly managed. To meet this challenge, the SVS SB-1000 Pro is equipped with a powerful DSP that can be controlled via iOS or Android apps. It has all the settings you need to get the best bass sound from your subwoofer.
Subwoofer SVS SB-1000 can be called universal simply based on its specification. A 12-inch driver and 300 watts of power allow it to be used in rooms of different sizes, and if we are talking about a larger cinema, you can simply increase the number of subwoofers - bass depth is enough for a movie. Another obvious and important fact is the size of the model. A cube with a face length of 34 cm is a very compact size for a powerful subwoofer operating from 24 Hz. It is easy to calculate that 34 cm is approximately 13 inches, respectively, a 12-inch caliber speaker occupies almost the entire area of the front panel. In addition, it is long-stroke, which allows you to provide a large sound pressure.
An important point: a large working stroke is usually given to small-sized speakers operating in a bass-reflex enclosure. Whereas large radiators (and 12 inches is already a rather large driver) in a closed acoustic design are traditionally made short-throw for better bass control. In this case, the manufacturers clearly had the task of combining high efficiency with small dimensions, so we have an atypical hybrid. In this scenario, the main thing is not to lose the advantages of both approaches.
Minimizing distortion in the SVS SB-1000 Pro transducer is ensured by two high-performance ferrite magnets of the highest class, a magnetic system with a field in the gap, a long voice coil and a rubber surround with a large amplitude of movement. To reduce compression in the magnetic system, a through hole was made to remove air from under the central part of the diffuser.
The drivers in the SVS 1000 Pro subwoofers were developed almost from scratch for the series. The design of the drivers uses a double ferrite magnet and a parabolic suspension of a long-throw aluminum cone, ensuring the achievement of high sound pressure in the listening room. with a long range for extreme walks with increased indoor pressure.
When the enclosed subwoofer is equipped with a powerful amplifier and a quality driver, you can expect deep and clear bass. But only if such a system is properly managed. To meet this challenge, the SVS SB-1000 Pro is equipped with a powerful DSP that can be controlled via iOS or Android apps. It has all the settings you need to get the best bass sound from your subwoofer.
Subwoofer SVS SB-1000 can be called universal simply based on its specification. A 12-inch driver and 300 watts of power allow it to be used in rooms of different sizes, and if we are talking about a larger cinema, you can simply increase the number of subwoofers - bass depth is enough for a movie. Another obvious and important fact is the size of the model. A cube with a face length of 34 cm is a very compact size for a powerful subwoofer operating from 24 Hz. It is easy to calculate that 34 cm is approximately 13 inches, respectively, a 12-inch caliber speaker occupies almost the entire area of the front panel. In addition, it is long-stroke, which allows you to provide a large sound pressure.
An important point: a large working stroke is usually given to small-sized speakers operating in a bass-reflex enclosure. Whereas large radiators (and 12 inches is already a rather large driver) in a closed acoustic design are traditionally made short-throw for better bass control. In this case, the manufacturers clearly had the task of combining high efficiency with small dimensions, so we have an atypical hybrid. In this scenario, the main thing is not to lose the advantages of both approaches.
Minimizing distortion in the SVS SB-1000 Pro transducer is ensured by two high-performance ferrite magnets of the highest class, a magnetic system with a field in the gap, a long voice coil and a rubber surround with a large amplitude of movement. To reduce compression in the magnetic system, a through hole was made to remove air from under the central part of the diffuser.
The built-in Sledge STA-325D amplifier operates in class D and delivers 325 watts in operation and over 800 watts at peak. It has a built-in digital processor that matches the speaker to the cabinet and helps achieve a linear output response. The volume, frequency and phase controls look and function in a digital dimension. The SB-1000 Pro has a full set of inputs: stereo low-level, as well as LFE, combined with low-level. There is also a stereo low-level output with a fixed cutoff frequency of 80 Hz. The latter will allow you to "unload" the power amplifier without a processor in the system.
The SVS SB-1000 Pro subwoofer has a switchable auto-standby system and a trigger input for integration into an automation system. The standby power consumption is 0.5 W, so it is not necessary to turn off the power completely every time. The heavy and durable subwoofer cabinet looks neat and compact. Thanks to the rounded edges of the body and the rounded grill, it does not attract attention and imperceptibly dissolves into the interior. The only thing that betrays its presence in a darkened room is a bright blue LED shining through the fabric of the grill. The grill is firmly attached to the body.
Specifications
General
Type of
Subwoofer active
Finishing
varnish
Acoustic design
closed case
Dust net color
grey
Remote control
No
Series
1000
Country (main office)
USA
Guarantee period
1 year
Color
black gloss
Height, mm
342
Width, mm
330
Depth, mm
375
Weight, kg
11.9
Characteristics
Woofer size, in inches
12
Cutoff frequency adjustment
step by step
Phase adjustment
0/90/180
Autotune
No
Wireless
option
Connection
Line in L+R
Auto power off
Yes
Minimum frequency, Hz
twenty
Number of speakers
one
Maximum frequency, Hz
270
Inputs
High Level Input
there is
Number of RCA line inputs
stereo
exits
RCA line outputs
stereo
 |
| image credit: SVSSOUND |
SVS PB 3000 SUBWOOFER
Breathtaking bass, well below the line of hearing, yet very precise and full of detail, all at an unbeatable price. In order to provide excellent bass reference sound, the SVS 3000 series combines the superior technology known from the flagship 16-ultra series subwoofers with innovative solutions.
The all-new, 13" long-throw SVS driver with a dual, 11kg toroidalnym motor delivers massive, room-filling sound while simultaneously offering you the lowest frequencies with total control and precision. The Sledge STA-800D2 amplifier (800W RMS, 2500+V peak power, MOSFETs) makes it effortless to directly drive a speaker up to the maximum levels of membrane tilt,
SVS PB 3000 Specifications
General
Type of
Active subwoofer
Finishing
veneer
Acoustic design
with phase inverter
Location of the phase inverter
front
Dust net color
grey
Series
3000
Color
black
Height, mm
557
Width, mm
465
Depth, mm
660
Weight, kg
37.3
Characteristics
Woofer size, in inches
13
Cutoff frequency adjustment
step by step
Phase adjustment
0/90/180
Connection
LFE
Auto power off
Yes
Minimum frequency, Hz
16
Number of speakers
one
Maximum frequency, Hz
260
Functions
Controlling the subwoofer with the remote control
app control
Inputs
Number of RCA line inputs
2
exits
RCA line outputs
2
Post a Comment