SVS PB 1000 Pro vs PB 2000 Pro

 SVS PB 1000 Pro vs PB 2000 Pro

SVS PB 1000 Pro

SVS PB 1000 Pro vs PB 2000 Pro


 

Overview

Room-shaking output well below the threshold of audibility, with pinpoint control and accuracy, the PB-1000 Pro obliterates performance expectations for subwoofers anywhere near the price. A reimagined 12-inch high-excursion SVS driver is married to a reference 325+ watts RMS, 820+ watts peak power Sledge amplifier with fully discreet MOSFET output for stunningly immersive cinematic bass. PB-1000 Pro is optimized with a new dual-port cabinet design for effortless bass with vanishingly low distortion and features the SVS Subwoofer DSP smartphone app for convenient tuning and control.

The original SVS PB-1000 rocked the subwoofer world with unparalleled performance at its price and beyond. Now, the PB-1000 Pro raises the bar even higher with greater low frequency output, deeper bass extension down to a guttural 17Hz, performance-enhancing dual port cabinet design, and a massive upgrade to the user experience.


A complete reimagination of the original 10-inch driver, the PB-1000 Pro features an all-new 12-inch high-excursion driver with dual high-grade ferrite magnets and FEA-optimized internal motor architecture for extreme excursion and massive, pristine output. With innovations to the cone, surround, voice coil, and motor assembly, the unflappable 12-inch driver unleashes room-shaking bass never-before-heard from a ported subwoofer anywhere near the price.


Using the same amplifier technology as the flagship SVS 16-Ultra Series, PB-1000 Pro features a 325 watts RMS, 820+ watts peak power Sledge STA-325D amplifier with fully discrete MOSFET output. Harnessing the massive power while ensuring accuracy and control is a 50 MHz Analog Devices Audio DSP with frequency response curves precisely tuned for the PB-1000 Pro.


PB-1000 Pro also features the SVS subwoofer smartphone app, the most convenient way to control volume, access multiple DSP functions, and program custom presets for one-touch tuning profiles optimized for music, movies, gaming, and more. Adjust crossover frequencies, a three-band parametric EQ, polarity, room gain and more, all from your favorite seat.


New to the PB-1000 Pro is a dual port configuration that enables greater output with much lower distortion compared to the original 1000 Series model.

Description

PB-1000 Pro stands alone in its excellence with massive output well below the threshold of human hearing, where bass is only felt, with flawless tonal accuracy and precise control. The deepest, most effortless, and refined bass at a truly breakthrough price, PB-1000 Pro defies expectations at every level with performance-driven innovation.


12-inch SVS High-Excursion Driver – Room-shaking bass with subtlety and refinement.

Substantially upgraded from the previous 10-inch 1000 Series driver design, the PB-1000 Pro features a reimagined 12-inch high-excursion driver with dual ferrite motor assembly. Capable of moving massive amounts of air with crisp precision, the added surface area provides a major performance upgrade over the previous model and features multiple enhancements.


Fiber composite cone with exceptional stiffness-to-mass-ratio generates huge SPLs while starting and stopping on a dime with crisp precision.

Proprietary injection molded extreme-excursion surround ensures flawless pistonic motion for pinpoint control and accuracy without distortion, even at the highest drive levels.

Dual ferrite magnet motor assembly with extended aluminum polepiece produces effortless on-demand driving-force for subtle and over-the-top bass thrills.

Powder coated FEA optimized driver basket provides maximum rigidity, tensile strength, and thermal energy transference.

Dual layer voice coil design enhances linearity and fidelity at full excursion while minimizing distortion and power compression.

SVS PB 1000 Pro vs PB 2000 Pro


Sledge STA-325D Amplifier – Effortless power with sophisticated control.

Conservatively rated at 325 watts RMS, 820+ watts peak power, the Sledge STA-325D amplifier maximizes the full potential of the 12-inch driver with effortless power and precise control. The innovative design combines the efficiency of a Class D amplifier with the ability to move colossal amounts of current through the fully discrete MOSFETs for outstanding real-world subwoofer performance at all drive levels, in any room, allows easy integration with any home theater or stereo speaker system.


High Current Output from Fully Discrete MOSFETs coupled with efficiency of Class D amplification allows the Sledge STA-325D amplifier to produce massive amounts of current enabling immense output with surgical precision.

Sophisticated 50Mhz High Resolution Analog Devices Audio DSP is the most advanced digital processor ever used in a subwoofer and maintains pristine sound quality through advanced in-room tuning, powerful DSP controls, custom presets, and more.

Optimized frequency response curves for the ported PB-1000 Pro cabinet allow the subwoofer to take control of a room and completely pressurize it with accurate, heart-pounding bass.

PB-1000 Pro Smartphone App – Easiest way ever to manage subwoofer DSP and control.

The most convenient way ever to control volume, access multiple DSP functions, and program custom presets for one-touch tuning optimized for music, movies, gaming, and more. Adjust crossover frequencies, dial-in the three-band parametric EQ, polarity, room gain and more, all from your favorite seat.


Connects via Bluetooth for convenient control even when subwoofer is out of sight.

Saved custom presets for one-touch tuning with optimized settings based on listening preferences for movies, music, and more. All accessible from a single touch.

Variable port tuning modes with customized frequency response curves for “Standard” and “Sealed” allow tuning for maximum output or deep bass extension and transient speed.

3-band parametric EQ controller allows precise adjustments for boost or cut, Q-factor, and frequency down to the single Hz level with so users can customize performance by eliminating peaks, nulls and other room issues.

Rear Panel Intelligent Control Interface (ICI).

The rear-panel SVS Intelligent Control Interface (ICI) provides control options and connections for the subwoofer’s most critical functions.


Rear Panel SVS Intelligent Control Interface

Level Control to fine tune the overall output level that best matches the system and room

Low pass filter control to ensure smooth sonic transitions and seamless blending with the main speakers

Phase control to align the subwoofer’s output timing with the main speakers or additional subwoofers

USB port also provides power for the optional SVS SoundPath Wireless Audio Adapter which eliminates the need for a cable run to the subwoofer from the source component.

RCA Audio Interconnect Input for use with most AV receivers and preamplifiers

Speaker Level Stereo Inputs for use with older legacy receivers

Acoustically Inert and Rigidly Braced Ported Cabinet Design.

Classically handsome, the acoustically optimized ported cabinet features extra-thick MDF front baffle and rigid internal bracing for a resonance-free environment. Serves as a blank canvas for uncompromised subwoofer performance.


Dual port design allows for maximum airflow without distortion, enhancing the quantity and quality of bass output at all drive levels

Acoustic insulation eliminates all coloration from the cabinet, even when the deepest low frequencies are played at reference volume

Protective non-resonant extra-thick ABS grille frame with fabric mesh cover shield driver to prevent damage while ensuring longevity

Reinforced internal bracing for resonance free performance at highest drive levels

Custom iso-elastomer screw-in feet reduce noise artifacts and improve stability

SVS PB 1000 Pro vs PB 2000 Pro


Specification

Subwoofer Specs:

Protective non-resonant extra-thick ABS fabric mesh grille

Iso-elastomer feet included

Extra heavy-duty, high current power cord 6'

Quick Start Guide

Port Plugs (free upon request)

Unbalanced stereo input/output

Speaker Level Stereo Input

Auto/On and Trigger options through app, 3-12V AC/DC trigger

RoHS compliant, lead-free construction, world-wide safety certifications

Green 0.5-watt low standby power consumption

Dual 2.5-inch ports

Dimensions (w/ grille): 18.9” (479mm) H X 15” (380mm) W X 20” (509mm) D

Dimensions (without grille): 18.9” (479mm) H X 15” (380mm) W X 19.2” (488mm) D

Shipped Dimensions: 23.4” (594mm) H 19.9” (506mm) W X 24.4” (619mm) D

Weight (unboxed): 42.5lbs (19.3kg) with Grille

Shipped Weight: 51.6lbs (23.4kg)

Driver Specs:

All-new proprietary 12-inch long-throw driver with high-precision tuned overhung motor configuration.

9.26lb (4.2kg) pound Woofer with 6.91lb (3.14kg) pounds motor

13.1mm Xmax, 26.8mm Xmech precision aligned excursion

1.5” diameter Voice Coil with high current 6-layer high-purity copper wire windings

Premium high-purity copper voice coil winding design minimizes distortion and power compression with maximum heat dissipation, linearity, and tuned magnetics for high excursion

Two-piece high grade oversized Y35 Ferrite magnet motor

High Temperature 3003-H18 aluminum former/bobbing

6” composite cotton-poly extreme excursion linear spider

Dual 24-strand copper-alloy high-temperature leads

Proprietary injection molded gasket and NBR extreme-excursion surround

Lightweight treated Fiber Composite cone for enhanced sensitivity and transient response

Top plate assembly with low carbon 1010 steel for optimal magnetics

Oversized low carbon 1008 steel T-yoke with integrated pole piece extension for maximum cooling and electromagnetics

12” premium powder coated basket with FEA optimized analysis for maximum rigidity, tensile strength, and energy transference

Oversized motor system for driving full excursion and industry best SPL, with pinpoint transient speed

Precision machining for motor and narrow tolerance suspension parts ensure flawless linearity at full range of excursion

SVS Sledge-325D Amplifier Specs:

325 watts RMS, 820+ watts peak power output Class D design

50Mhz Analog Devices Audio DSP, high resolution double precision 56bit filtering

Wide input voltage bandwidth compliant for consumer and pro audio up to 4V line level input.

High efficiency LLC resonant SMPS with 17A 650V MOSFET, resonant switching results in lower EMI and highest efficiency.

Cool-running Class D amplifier switching topology with massive 34A 120V MOSFET’s

SVS BLE control app for iOS and Android contains 3 complete name-able and customizable User presets, supports IOS (iphone5 or newer or Android (4.42 or newer), 3 PEQ's per preset, adjustable low pass, phase, polarity, room gain compensation, and control for best alignment with speakers.

Customer EQ and DSP limiter settings specifically for the 1000 Pro

Input impedance 16kohm (unbalance RCA)

Input impedance 1kohm (speaker level)

New Intelligent Feature control (IFC) user interface on the amplifier with bright blue 11 LED bar display and easy push-button controls.

SVS App Specs:

Bluetooth controlled subwoofer DSP smartphone app works with iOS, Android and Amazon operating systems.

Easiest and most convenient way to adjust crossover frequencies, parametric EQ, polarity, room gain and all other bass management functions.

Three convenient custom presets allow for perfect tuning in any room or system, from your favorite seat.

Unique bidirectional feedback shows adjustments in real time on both app and subwoofer interface.

Easy-to-follow tutorial provides clear guidance for all functions.

Accessories:

Protective non-resonant extra-thick ABS fabric mesh grille

Iso-elastomer feet included

2 Foam port tuning plugs

Extra heavy-duty, high current 6-foot power cord

Quick Start Guide

SVS PB 2000

SVS PB 1000 Pro vs PB 2000 Pro



Overview

Breathtaking output and subterranean low frequency extension down to 16 Hz with astonishing detail and accuracy. PB-2000 Pro features all-new 12-inch high-excursion SVS driver and 550 watts RMS, 1,500+ watts peak power Sledge STA-550D amplifier with fully discrete MOSFET output. Harnessing the massive power while ensuring unerring control and room-energizing bass response is a 50 MHz Analog Devices Audio DSP. PB-2000 Pro also features the SVS subwoofer smartphone app for convenient control of volume, DSP functions, custom presets and more.

Description

Reference Subwoofer Performance Hits New Lows. Again.

2000 Pro models replace the most popular SVS subwoofers of all time, and since we don’t believe in anything less than a complete reimagination, they represent a massive performance upgrade over the original 2000 Series in every way. Jaw-dropping deep bass extension and massive output with stunning musicality that will delight both audiophiles and home theater fans. Reference subwoofer performance has never been available at this price range.

A sophisticated 550 watts RMS, 1,500+ watts peak power Sledge STA-550D DSP amplifier, innovative new 12-inch high-excursion SVS driver, and optimized dual ported cabinet design take control of a space with amazingly deep and room-filling output without a hint of distortion, even at reference playback levels.

PB-2000 Pro features convenient control and custom presets via the SVS subwoofer DSP smartphone app for Apple, Android and Amazon devices ®. The SVS app is the most convenient way to control volume, access multiple DSP functions and program custom presets for music, movies, gaming, and more. An ideal solution for reference bass in audiophile music systems or home theater surround sound systems, the PB-2000 Pro sets all performance benchmarks in its price range while outperforming much larger subwoofers.

Breathtaking Output and Deep Bass Extension with Pinpoint Control and Accuracy.
Featuring technology from the flagship SVS 16-Ultra Series, winners of nearly every industry and media award as the top subwoofers worldwide, the PB-2000 Pro unleashes breathtaking output and extension without ever sacrificing driver control or frequency response accuracy. The ported cabinet design combines the most sophisticated SVS subwoofer technology ever developed with trailblazing innovations to set a new standard for subwoofer performance based on price and cabinet size.

SVS PB 1000 Pro vs PB 2000 Pro


All New 12-inch High-Excursion SVS Driver – Heart-Pounding Bass with Subtlety and Finesse
ll New 12-inch High-Excursion SVS Driver

Completely redesigned 12-inch SVS driver delivers massive low frequency output with unerring accuracy and transient speed. An aluminum vented cone with exceptional stiffness to mass ratio and a proprietary injection molded extreme-excursion surround ensure flawless pistonic motion for flawless control and accuracy.

Dual ferrite magnet motor assembly weighing over 15 lbs generates massive amounts of magnetics to produce extreme driver excursion without losing control. Effortlessly achieves extension below 20 Hz without distortion.

Lightweight and rigid aluminum vented cone with composite fiber dustcap creates room-energizing SPLs while maintaining control even at the highest drive levels.

Long-throw parabolic surround using proprietary injection molding allows extreme excursion for bass you can feel while preserving drive unit longevity.

Aluminum pole piece extension improves thermal management properties for exceptional heat dissipation.

Dual layer voice coil design maximizes linearity and accuracy at full excursion while minimizing distortion and power compression.

Sledge STA-550D Amplifier – Effortless Power and Absolute Command.

Conservatively rated at 550 watts RMS, 1,500+ watts peak power, the Sledge STA-550D amplifier maximizes the full potential of the 12-inch driver with effortless power and precise control. The innovative design combines the efficiency of a Class D amplifier with the ability to move colossal amounts of current through the fully discrete MOSFETs for outstanding real-world subwoofer performance at all drive levels, in any room.

High Current Output from Fully Discrete MOSFETs with Efficiency of Class D Amplifier allows the Sledge STA-550D amplifier to move massive amounts of current enabling immense output with surgical precision.

Sophisticated 50Mhz High Resolution Analog Devices Audio DSP is the most advanced digital Processor ever used in a subwoofer and maintains pinpoint accuracy and pristine sound quality through advanced in-room tuning, powerful DSP controls and more. Frequency response curves optimized specifically for the PB-2000 Pro allow the subwoofer to take control of a room and completely pressurize it with crisp, heart-pounding bass.

PB-2000 Pro Smartphone App – Easiest Way Ever to Manage Subwoofer DSP and Control.
2000 Pro Series subwoofer app is the most convenient way ever to control volume, access multiple DSP functions and Program custom presets for one-touch tuning optimized for music, movies, gaming, and more. Adjust crossover frequencies, a three-band parametric EQ, polarity, room gain and more, all from your favorite seat.

SVS PB 1000 Pro vs PB 2000 Pro



The SVS subwoofer app also allows advanced customization so you can name your subwoofer for easy preset switching, choose the subwoofer standby mode and reset the subwoofer to factory settings. Bluetooth connectivity allows full control, even when the subwoofer is out of sight and bi-directional feedback shows adjustments in real time on both the app and rear panel subwoofer interface.
Connects via Bluetooth for convenient control even when subwoofer is out of sight.

Custom presets can be saved for movies, music and more so you have one-touch tuning optimized for your listening preferences.

Connects via Bluetooth for convenient control even when subwoofer is out of sight.

3-band parametric EQ controller allows precise adjustments for frequency slope and Q factor down to the single Hz level with four different slopes, so users can improve performance by eliminating peaks, nulls and other room issues.

Variable Port Tuning Modes with customized frequency response curves for “Standard” and “Sealed” allow tuning for maximum output or deep bass extension and transient speed.

2-way feedback shows updates in real time on both the app and rear panel subwoofer interface.

Rear Panel Intelligent Control Interface (ICI).

Other features of the ICI include a low pass filter frequency to ensure smooth sonic transitions and seamless blending with loudspeakers and phase control to shift timing of subwoofer output to align with main speakers or additional subwoofers.

Other features of the ICI include a low pass filter to ensure smooth sonic transitions and seamless blending with loudspeakers and phase control to shift timing of subwoofer output to align with main speakers or additional subwoofers.

Acoustically Inert and Rigidly Braced Ported Cabinet Design.
Extra-thick MDF front baffle and extensive internal bracing in the acoustically optimized PB-2000 Pro Series cabinet create a resonance-free environment that serves as a blank canvas for uncompromised subwoofer performance. Acoustic insulation eliminates all coloration or resonance from the cabinet, even when the deepest low frequencies are played at reference volume. Includes protective, non-resonant extra-thick ABS grille and custom iso-elastomer feet for reducing noise artifacts within a room.

SVS PB 1000 Pro vs PB 2000 Pro


Specification

Subwoofer Specs:

Premium Black Ash finish option
Protective non-resonant extra-thick ABS fabric mesh grille
Front-firing 12-inch high-excursion SVS driver
Dual 3-inch ports
Rear-mounted amplifier with Intelligent Control Interface (ICI)
Iso-elastomer feet
Robust Medium Density Fiberboard (MDF) cabinet construction
Dimensions (w/ grille): 20.9” (532mm) H X 17.3” (440mm) W X 23.6” (600mm) D
Dimensions (without grille): 20.9” (532mm) H X 17.3” (440mm) W X 22.5” (571mm) D
Shipped Dimensions: 26.1” (662mm) H X 22.1” (562mm) W X 30” (762mm) D
Weight (unboxed): 64.8lbs (29.4kg) with Grill
Shipped Weight: 77.9lbs (35.3kg)

Driver Specs:

All-new proprietary 12-inch high-excursion SVS 2000 Pro subwoofer driver with overhung motor
Dual layer high purity copper voice coil provides maximum magnetics at extreme excursion while reducing mass and improving driver efficiency. Built around a premium grade 2” polyimide impregnated fiberglass former for maximum thermal conductivity.
Two massive, dedicated toroidal ferrite magnets generate unparalleled levels of magnetic force to drive the highest levels of excursion, SPL, and start/go power for the deepest and most authoritative bass possible.
New premium powder coated basket, FEA optimized for maximum rigidity, tensile strength, and energy transference.
All new 12-inch 1050 aluminum vented cone ensures a light, ridged, and neutral radiating surface.
Precision machined motor elements and narrow tolerance suspension parts produce unmatched linearity at full excursion for exceptionally tight and fast output, even at reference volumes.
Extreme oversized low carbon vented 1008 steel U-yoke and top plate provide superior cooling and improved magnetics for maximum performance and efficiency.
Aluminum shorting sleeve reduces gap induction and distortion, enhances thermal conductivity, and improve magnetic linearity.
Dual balanced 24-strand silver plated Litz wire high temperature leads woven through the Nomex composite spider provide a pristine electrical connection from the amplifier to the voice coil.
Nickle-plated high-tension spring terminals.
Proprietary injection molded gasket and extreme-excursion surround maintains ideal pistonic motion for pinpoint accuracy and control.
SVS Sledge-550D Amplifier Specs:
Massively powerful Sledge 550-watt RMS Class-D design with 1,500+ watts of Peak Power
High efficiency cool-running Class-D switching topology with massive 25 Amp 600 Volt MOSFET’s result in lower EMI and highest efficiency while providing effortless power to produce SPLs and low frequency output with pristine clarity well beyond reference listening levels.
High resolution 50Mhz Analog Devices Audio DSP with double precision 56bit filtering is most advanced subwoofer processor available in a home subwoofer.
Unmatched intelligence from user adjustable low pass, phase, polarity and room gain compensation with three parametric EQs for absolute best alignment with speakers and optimized performance in any room.
Groundbreaking SVS Bluetooth DSP control app for iOS and Android devices with three user presets allow custom tuning for every room and system.
RCA stereo input/output with ultra-wide input voltage for consumer and professional audio applications.
All new rear panel Intelligent Control Interface (ICI) user interface with push-button controls.
USB output for service and powering accessories like the SVS SoundPath Wireless Audio Adapter for wireless subwoofer placement.
Auto/On and 3-12V AC/DC trigger for Maximum Installation Convenience.
Input impedance 16kohm (unbalanced RCA).
Green 0.5-watt low standby power consumption.
RoHS compliant, lead-free construction, world-wide safety certifications.

SVS App Specs:

Bluetooth controlled subwoofer DSP smartphone app works with iOS, Android and Amazon operating systems.
Easiest and most convenient way to adjust crossover frequencies, parametric EQ, polarity, room gain and all other bass management functions.
Three convenient custom presets allow for perfect tuning in any room or system, from your favorite seat.
Unique bidirectional feedback shows adjustments in real time on both app and subwoofer interface.
Easy-to-follow tutorial provides clear guidance for all functions.
Accessories:
Protective non-resonant extra-thick ABS fabric mesh grill
Iso-elastomer feet included
2 Foam port tuning plugs
Extra heavy-duty, high current 6-foot power cord
Quick Start Guide

Post a Comment