Alpha C10 – Centre

Alpha C10 – Centre


Description

Hear everything in full detail
The C10 uses a ¾” (19mm) black anodized aluminium dome tweeter to extend the high-frequency response further than any Alpha ever before, while lowering distortion to deliver a layered soundstage full of detail and clarity. Unlike lesser designs at this price, all the new Alpha Series tweeters employ ferrofluid cooling to prevent dynamic compression and a neodymium magnet for high sensitivity. The tweeter’s front waveguide and its unique placement below the woofer work together to smooth the response at the crossover and perfect on and off-axis performance.

Bring the cinema home
When paired with the Alpha Series’ newly designed tweeter, the C10’s custom 5¼” (133mm) woofer provides remarkable low-frequency response and the highest speaker efficiency in its class. The woofer is constructed from a special textured polypropylene compound that minimizes cone breakup and lowers distortion at full excursion. It’s also supported with dual layer voice coils and a bass reflex design that uses the rear-firing port tube to control the bass response down to room-shaking levels.

Matched to perfection
The Alpha Series’ new crossover exceeds speaker standards with a special custom design that does more than direct low and high frequencies to the individual drivers–it delivers the tightest control and the flattest frequency response. An unusually complex Acoustic Linkwitz-Riley filter design has also been incorporated into the crossover design to lower distortion and create a seamless soundscape in any type of two-channel setup or surround sound system.

Seamless home theatre integration
A unique combination of wall thickness and bracing controls resonances and provides a perfect platform for the C10’s driver components, while its internal damping material is from PSB’s flagship lines and has been positioned precisely for optimal effectiveness. Finished with a high-quality wood grain vinyl and magnetically attached grilles that are acoustically transparent, the C10 is perfectly designed to sit alongside your furniture and provide rich, detailed sound.

  • ¾” (19mm) Black anodized aluminium dome tweeter with front waveguide
  • Two 5¼” (133mm) Textured polypropylene woofers with rubber surround
  • Bass reflex cabinet design with a rear-firing port
  • Acoustically-transparent detachable magnetic grilles
  • Dual five-way gold-plated binding post speaker terminals
  • High-quality woodgrain vinyl finish
  • Available in Black Ash or American Walnut
Frequency Response
On Axis @ 0° ±3dB 55-21,000Hz
On Axis @ 0° ±1 1/2dB 65-20,000Hz
Off Axis @ 30° ±1 1/2dB 65-10,000Hz
LF Cutoff -10dB 37Hz
Sensitivity
Anechoic Chamber 88dB
Listening Room 90dB
Impedance
Nominal 8 Ohms
Minimum 6 Ohms
Input Power
Recommended 15 - 120 Watts
Program 60 Watts
Acoustic Design
Tweeter (Nominal) 3/4” (19mm)
Black Anodized Aluminium Dome with
Ferrofluid and Neodymium Magnet
Woofer (Nominal) 2 x 5 1/4” (133mm)
Textured Polypropylene Cone
with Rubber Surround
Crossover 2,500Hz, LR4
Internal Volume 0.44 cu ft (12.5L)
Design Type Tuned Port Bass Reflex
2” (49mm) Rear Port
Dimensions / Weights / Finish
Size (W x H x D) 17 3/4” x 6 3/4” x 9 3/8”*

(450 x 170 x 243mm)
Weight 17lb (7.7kg)

19.9lb (9.0kg)
Finish** Black Ash

Walnut
Notes * Non-metric measurements are approximate.

** Some finishes may not be available in all models and/or all countries.

All specifications are subject to change without notice.

Post a Comment

0 Comments