fyne audio f1 10


fyne audio f1 10

The F1-10 distils Fyne Audio’s decades of HiFi point source loudspeaker expertise into a design of

 breath-taking acoustic performance and eye-watering beauty.  cavity BassTrax ported cabinet deliver bass down to 28Hz while the 75mm titanium dome compression

 tweeter offers seamless, time aligned HF response to over 26kHz. The F1-10’s very high sensitivity

 (94dB/W) ensures exceptional dynamic range and compatibility with the widest range of amplifiers from

 single ended triode valve models to the highest power solid state designs. The BassTrax porting and high

 quality potentiometer controls for HF energy and presence ensure the F1-10 will deliver optimum

 performance irrespective of room size or placement. Available in traditional lacquered burr walnut finish

 with plinth top, the F1-10 offers exemplary finish and a bold statement in loudspeaker design for the audiophile.



fyne audio f1 10

Product Specification

System Type 2 way, downwards firing port with BassTrax Tractrix diffuser

Recommended amplifier power (Watt RMS) 20 - 280

Continuous power handling (Watt RMS) 140

Sensitivity (2.83 Volt @ 1m) 94dB

Nominal impedance 8 Ohm

Frequency response (-6dB typical in room) 28Hz - 26kHz

Drive unit complement 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium dome compression tweeter, neodymium magnet system

Crossover frequency 750Hz

Crossover type Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated

System adjustments High frequency energy (750Hz - 26kHz) +/-3dB Presence (2.5kHz - 5.0kHz) +/- 3dB

Dimensions - HxWxD 1191 x 405 x 581mm (46.9 x 15.9 x 22.9”)

Weight - Each 57.7kg

Finishes Piano Gloss Walnut

Post a Comment

0 Comments